Abrites Update from VN021 to VN024

Abrites MN038 license allows you the exceptional ability to calibrate IC223 (2020+) and IC177 M (2023+) clusters in Mercedes-Benz vehicles, equipped with Visteon R7F701529 BGA processors. This software license ensures a safer and simpler process, not requiring any work with the EZS (EIS) module - it is neither needed, nor affected during the procedure. Synchronisation between the EZS (EIS) module and the Instrument cluster is blocked via an emulator. All operations are carried out directly on the IC223/IC177 M cluster PCB for maximum efficiency and reliability. Functionality: Adjust the mileage value in the IC223/IC177 M dashboard Block the synchronization of the mileage with the EZS module Supported Models: W223 S-Class 2020+ W206 C-Class Sedan (Saloon) 2021+ S206 C-Class Station Wagon (T-model) 2021+ V206 C-Class Long Wheelbase Sedan 2021+ X206 C-Class All- Terrain 2021+ X254 GLC 2022+ C254 GLC Coupe 2022+ C236 CLE Coupe 2023+ A236 CLE Cabriolet 2023+ Other models with the IC223, equipped with Visteon R7F701529 BGA processor Including models after 2023 with IC177 M, equipped with Visteon R7F701529 BGA processor, such as: W177 A-Class W243 B-Class W247 B-Class H243 EQA- Class X243 EQB- Class C118 CLA- Class H247 GLA- Class W167 GLE/ GLS- Class X247 GLB-Class W257 CLS-Class X290 AMG GT Four Door Facelift The procedure requires working with the IC223/IC177 M module's PCB on bench, unsoldering a few capacitors and soldering the wires of the CB501 cable onto it. Wiring diagrams are included within the software for guidance. If alternative wiring is required for specific modules In order to connect and work with the IC223/IC177 M cluster successfully, you will need the ZN085 RH850/V850Programmer and the ZN092 adapter. The EM019 adapter is required to complete the procedure successfully. After the new value is written with the help of the RH850 Programmer and CB501 cable, unsolder the CB501 wires and solder the EM019 as shown in the user manual. AVDI with active Annual Subscription is required to use this functionality.

Abrites BN020 - Key programming for BMW vehicles Specs: Manufacturer: ABRITES Abrites BN020 license allows you to program additional keys for BMW vehicles with BDC02 (Body Domain Controller 2nd generation), used in F- and G-Series, on bench. Abrites BN020 - Key programming for BMW vehicles Functionality: Adding a spare key to any F and G Series based vehicles equipped with Body Domain Controller of second generation (BDC02) Abrites BN020 - Key programming for BMW vehicles Supported models: Any software version of BDC02 installed in M5 (F90) 3 Series (G30) 5 Series (G30/G31/G38) 4 Series (G80/G81/82) 6 series (G32) 7 Series (G11/G12) X3/X4, IX3 (F97/F98, G01/G02, G08) M8 (F91/F92/F93) 8 Series (G14/G15/G16) Abrites BN020 - Key programming for BMW vehicles Supported ECUs/software versions: swfl_00001df4.106_020_030 swfl_00005fa8.108_020_020 swfl_00005fa8.109_051_010 swfl_00005fa8.109_067_010 swfl_00001df4.100_062_020 swfl_00005fa8.108_030_010 swfl_00005fa8.109_062_010 swfl_00001df4.100_150_050 swfl_00005fa8.109_049_041 swfl_00005fa8.109_063_040 swfl_00001df4.102_050_040 swfl_00005fa8.109_050_050 swfl_00005fa8.109_065_010 Abrites BN020 - Key programming for BMW vehicles Supported years: Usually BDC02 is installed in most of the above mentioned models up to around 2021, but there are certainly some later cars still using this generation. Abrites BN020 - Key programming for BMW vehicles Required hardware: ABRITES Vehicle Diagnostics Interface (AVDI)* ABRITES Distribution Box Set (ZN151) Protag (ZN003) BDC2 Bench Connector Cable (ZN095) - mandatory for the procedure, coming soon The procedure is non-invasive. It does not require wire soldering or removal of components from the Body Domain Controller itself and is the best possible solution for the programming of spare (additional) keys to any BDC02 cars. *AVDI with active Annual Subscription is a must.